|
|
|
Type
|
The NP10 is a small 3 cylinder triplex pump.
|
|
Description
|
The Speck name is synonymous with
quality and reliability. All our pumps are manufactured to the highest
standards, using the latest in manufacturing technology.
The NP10 Range of pumps
upholds this quality by providing:-
- Solid
ceramic plungers.
- Double
plunger sealing with leakage return.
- All
gaskets in seal sleeves ensuring precise centring and easy replacement.
- Identical
suction and discharge valves, easily replaceable.
- Pump
easily configured for left and right hand drive.
The majority of spares for these
pumps are available from stock.
|
|
Standard Models
|
| Model |
I/min
|
bar
|
rpm
|
KW
|
| NP10/10-140 |
10.6
|
140
|
1450
|
3
|
| NP10/13-140 |
13.1
|
140
|
1450
|
3.6
|
| NP10/15-140 |
14.6
|
140
|
1450
|
4.1
|
|
|
Special Models
RE - 316 Stainless Steel
T - Teflon Seals
V - Viton O Rings/Seals
S - Seawater Version
C - CO² Version
|
| Model |
I/min
|
bar
|
rpm
|
KW
|
| NP10/1-220 |
1.5
|
220
|
1450
|
0.7
|
| NP10/4-140 |
3.60
|
140
|
1450
|
1.00
|
| NP10/4-140S |
3.60
|
140
|
1450
|
1.00
|
| NP10/10-140S |
10.60
|
140
|
1450
|
3.00
|
| NP10/13-140S |
13.10
|
140
|
1450
|
3.60
|
| NP10/15-140S |
14.60
|
140
|
1450
|
4.10
|
| NP10/4-140RE |
3.60
|
140
|
1450
|
1.00
|
| NP10/10-140RE |
10.60
|
140
|
1450
|
3.00
|
| NP10/13-140RE |
13.10
|
140
|
1450
|
3.60
|
| NP10/15-140RE |
14.60
|
140
|
1450
|
4.10
|
| NP10/4-140REV |
3.60
|
140
|
1450
|
1.00
|
| NP10/10-140REV |
10.60
|
140
|
1450
|
3.00
|
| NP10/13-140REV |
13.10
|
140
|
1450
|
3.60
|
| NP10/15-140REV |
14.60
|
140
|
1450
|
4.10
|
| NP10/4-140REVT |
3.60
|
140
|
1450
|
1.00
|
| NP10/10-140REVT |
10.60
|
140
|
1450
|
3.00
|
| NP10/13-140REVT |
13.10
|
140
|
1450
|
3.60
|
| NP10/15-140REVT |
14.60
|
140
|
1450
|
4.10
|
| NP10/4-140C |
1.80
|
140
|
750
|
|
| NP10/10-140C |
5.30
|
140
|
750
|
|
|
|
Download
|
For Information On Special pumps please contact
us.
|
| Construction
Characteristics |
- Crankcase
of solid cast aluminium.
- Crank
Case and roller bearings together with plain bearing con rod all run
in oil.
- Solid
ceramic plunger.
- Double
plunger sealing with leakage return.
- All
gaskets in seal sleeves ensuring precise centring and easy replacement.
- Identical
suction and discharge valves, easily replaceable
|
| Materials
Used |
| Valve
Casing: |
Special
Brass |
| Plunger:
|
Ceramic |
| Valves: |
High-Grade
Stainless Steel |
| Sleeves: |
Nitrile
with fabric reinforcing. |
|
Support Rings: |
Teflon
with graphite. |
| Crankshaft:
|
Drop-forged
and case-hardened |
|
| Installation |
Even though SPECK-TRIPLEX
NP10 pumps run almost pulsation-free, there are cases where a pressure
accumulator is necessary. This will depend mainly on the construction
of the unit and the conditions under which it is operated. The same effect
can also be achieved by using flexible pressure lines. In any case, use
of a pulsation damper adds considerably to the life of the seals and bearings.
Particular care has to be taken when pumping warm water, making absolutely
sure that cavitation can not occur.
|
|
Warranty
|
There
is a 6 month warranty in accordance with VDMA guidelines. Pump operation
without safety valve as well as any excess in temperature or speed limits
automatically voids the warranty. The safety valve must be regulated in
accordance with the guidelines for liquid spraying units so that the admissible
operating pressure can not be exceeded by more than 10%. |
/Pumps/NP10Pump.gif)
(Approx 103 kb)