The P41 is a 3 cylinder triplex pump.

The Speck name is synonymous with quality and reliability. All our pumps are manufactured to the highest standards, using the latest in manufacturing technology.

The P45 Range of pumps upholds this quality by providing:-

• Solid ceramic plungers.
• Drip return ensuring long seal life and drip free operation.
• Identical suction and discharge valves, easily replaceable

The majority of spares for these pumps are available from stock.

None

• Crankcase of solid cast aluminium.
• Crank Case and roller bearings together with plain bearing con rod all run in oil.
• Solid ceramic plunger.
• Drip return ensuring long seal life and drip free operation.
• Identical suction and discharge valves, easily replaceable

SPECK TRIPLEX Plunger Pumps are suitable for pumping clean water and other non-agressive or abrasive media with a similar specific weight to water.

Prior to pumping any other media, a check must be made to find out whether these pumps , taking pump performance and temperature values into consideration, are at all suitable for pumping the required medium.

Even though SPECK-TRIPLEX P45 pumps run almost pulsation-free, there are cases where a pressure accumulator is necessary. This will depend mainly on the construction of the unit and the conditions under which it is operated. The same effect can also be achieved by using flexible pressure lines. In any case, use of a pulsation damper adds considerably to the life of the seals and bearings. Particular care has to be taken when pumping warm water, making absolutely sure that cavitation can not occur.