The P80 is a 3 cylinder triplex pump.

The Speck name is synonymous with quality and reliability. All our pumps are manufactured to the highest standards, using the latest in manufacturing technology.

The P80 Range of pumps upholds this quality by providing:-

• Crankcase of solid sphero- cast iron ensuring stability and vibration dampening.
• Drive available with integrated oil cooler for maximum load and continuous operation.
• Pump available with bare shaft, or with flange mounted reduction gear.
• Crankshaft and taper roller bearings together with plain con rod all run in oil.
• Solid Ceramic Plungers.
• Double plunger sealing.
• All gaskets in seal sleeves ensuring precise centring and easy replacement.
• Identical suction and discharge valves, easily accessible

* Pumps Coming Soon

• Crankcase of solid sphero- cast iron ensuring stability and vibration dampening.
• Drive available with integrated oil cooler for maximum load and continuous operation.
• Pump available with bare shaft, or with flange mounted reduction gear.
• Crankshaft and taper roller bearings together with plain con rod all run in oil.
• Solid Ceramic Plungers.
• Double plunger sealing.
• All gaskets in seal sleeves ensuring precise centring and easy replacement.
• Identical suction and discharge valves, easily accessible

SPECK TRIPLEX Plunger Pumps are suitable for pumping clean water and other non-agressive or abrasive media with a similar specific weight to water.

Prior to pumping any other media, a check must be made to find out whether these pumps , taking pump performance and temperature values into consideration, are at all suitable for pumping the required medium.

Even though SPECK-TRIPLEX P80 pumps run almost pulsation-free, there are cases where a pressure accumulator is necessary. This will depend mainly on the construction of the unit and the conditions under which it is operated. The same effect can also be achieved by using flexible pressure lines. In any case, use of a pulsation damper adds considerably to the life of the seals and bearings. Particular care has to be taken when pumping warm water, making absolutely sure that cavitation can not occur.